how to blow out sprinkler system with air compressor

Thoroughly expelling all traces of liquid and sediment from your sprinkler setup with an air compressor is a necessity for maintaining optimal irrigation performance. Purging the pipes and fittings of redundant H2O and detritus safeguards that the system is running effectively – blocking any potential freezing, which would otherwise lead to severe damage. Ultimately, upholding a comprehensive blow out provides lasting protection for your sprinkler system.

To avoid upsetting a spray of water, ensure the main water valve of the sprinkler system is switched off before commencing the relatively straightforward process of blowing it out with an air compressor – a task that can be accomplished in a few steps.

The next step of the process is to connect the air compressor to the system, which is done through securing the air compressor hose to the blowout valve. However, it’s imperative to make certain that the air compressor is suitable for the size of your sprinkler system; otherwise, if its power is insufficient, it won’t be able to sufficiently evacuate the system.

As soon as the air compressor is securely connected, switch it on and wait for the pressure to accumulate. As soon as the desired amount of pressure is reached, activate the blowout valve to start blowing out the water and sediment from the sprinkler system. Be certain that you keep on blowing until all the water and sediment have been completely expelled from the system.

After getting rid of all water residues and sediments, it’s time to switch off the air compressor and blowout valve. Time to refill the system with fresh water. Do not forget to check the pressure gauge of the compressor. Ensure it is in its “off” state.

After the system is topped off, shut off the main water valve and activate the air compressor once more. This time, the air compressor will be bringing in gusts of air to rout any leftover sediment or particles. When the system is spotless, switch off the air compressor and close the blowout valve.

Once all preparatory measures are completed, it is paramount to activate the primary water valve and guarantee that the system is operational. Even though these procedures appear uncomplicated, they must be conducted sans fault. Utilizing an air compressor for blowing out a sprinkler system can guarantee that it will serve its purpose for many years to come, all while preserving its longevity.

Keeping a sprinkler system running smoothly for extended periods of time can be achieved by utilizing an air compressor to expel unwanted moisture and other obstruction. This straightforward process includes several easy-to-follow steps to ensure the best possible results.

Winterizing a sprinkler system is a crucial step to ensure its efficacy during the frosty season. Utilizing an air compressor to blow out the system is an effective way to protect the pipes from fracturing or succumbing to the harsh cold temperatures. This article will provide a comprehensive guide to properly executing this process and highlight why it is so important.

To ensure no water is able to enter the sprinkler system while it is being worked on, the main water supply must first be completely disconnected. Safety is an important factor in this step. After this, the main valve must be opened to release any remaining stored water in the system.

In order to ensure all water is dissipated from the pipes, a reliable air compressor, which is skillfully calibrated and sufficient enough to tackle the system’s needs, should be connected to the main valve after draining is complete. Following secure bond, the device can be brought to life and its pressure altered until a forceful suction expels all dampness from the tubes.

The air compressor should be given time to do its job entirely, i.e., pumping out all the water within the system. This could take anywhere from a few minutes to longer, depending on the overall size of the system. When all the water has been blessedly extracted, you can then turn off the air compressor and shut off the primary valve.

In order to stay safe while utilizing an air compressor for the purpose of cleaning out a sprinkler system, it is advised to equip oneself with defensive items such as safety goggles and hand coverings. This would safeguard against possible bits and pieces of debris appearing during the operation.

After a successful blowout, it is essential to verify that all the water has cleared the system. This can be achieved by turning on the main valve and running a garden hose through the sprinklers to ensure everything is running correctly. If any moisture remains, go over the process until the system has been fully dried out.

To avoid costly and potentially destructive freezing of a sprinkler system during winter months, an air compressor is used to remove all moisture. This easy process can be done safely and successfully with the proper precautions, beginning with a correctly sized air compressor for the system. Taking the right steps can help to preserve the system’s status of proper working order, while also protecting it from damage due to cold weather. Embracing this method of winterizing a sprinkler system allows it to remain safe and protected throughout the chilliest season.

Related Product